****************************************************************************** CONTACT SIMULATION PROGRAM ****************************************************************************** $$$ Current Year: 2011 Month: 1 Day: 27 $$$ CASE DESCRIPTION: Punch Contact-Square, W=500 N, E2=25 Punch Contact: Flat Square Tip ============================== Length of Punch Tip: 1.00000 mm Average Pressure: 0.50000 GPa Timing Starts (sec)= 8.09375000000000 NT= 1 Pmx= 8.53046 Ha= 79.5645 nm Rq= 0.11423 micron CPU= 45.750 NT= 2 Pmx= 8.53046 Ha= 79.5647 nm Rq= 0.11423 micron CPU= 46.281 NT= 3 Pmx= 8.53046 Ha= 79.5645 nm Rq= 0.11423 micron CPU= 46.828 NT= 4 Pmx= 8.53046 Ha= 79.5646 nm Rq= 0.11423 micron CPU= 47.359 NT= 5 Pmx= 8.53046 Ha= 79.5646 nm Rq= 0.11423 micron CPU= 47.891 NT= 6 Pmx= 8.53046 Ha= 79.5646 nm Rq= 0.11423 micron CPU= 48.391 NT= 7 Pmx= 8.53046 Ha= 79.5646 nm Rq= 0.11423 micron CPU= 48.938 NT= 8 Pmx= 8.53046 Ha= 79.5646 nm Rq= 0.11423 micron CPU= 49.469 NT= 9 Pmx= 8.53046 Ha= 79.5646 nm Rq= 0.11423 micron CPU= 49.984 NT= 10 Max. von Mises Stress= 1.710165 at X= 0.996094 Y= 0.000000 Z= 0.013333 NT= 10 Pmx= 8.53046 Ha= 79.5646 nm Rq= 0.11423 micron CPU= 135.094 Operating Conditions ==================== Applied Load: 500.000 N Applied Load for Meshing: 500.000 N Surface 1 Speed: 0.0000000 m/s Surface 2 Speed: 0.0000000 m/s Rolling Speed: 0.0000000 m/s Slide-to-Rolle Ratio: 0.0000000 Spinning Speed: 0.00000 rpm Materials Properties ==================== Youngs Modulus of Body 1: 206.00000 GPa Youngs Modulus of Body 2: 25.00000 GPa Possions Ratio of Body 1: 0.30000 Possions Ratio of Body 2: 0.30000 Effective Youngs Modulus: 48.99862 GPa Density of Body 1: 7.86500 g/cm3 Density of Body 2: 7.86500 g/cm3 Coefficient of Friction: 0.00000 Original Surface Roughness ========================== RA1= 0.01971 Micron RQ1= 0.02500 Micron File Name of Surface 1: shaved-1.suf RA2= 0.11763 Micron RQ2= 0.15000 Micron File Name of Surface 2: shaved-2.suf Composite RMS Roughness (Sigma): 0.15207 Micron Roughness Ratio RQ1/RQ2: 0.16667 Surface Roughness with Textures =============================== RRA1= 0.10531 Micron RRQ1= 0.25506 Micron RRA2= 0.11763 Micron RRQ2= 0.15000 Micron Composite RMS Roughness (Sig): 0.29589 Micron Roughness Ratio RQ1/RQ2: 1.70037 Solution Domain Parameters ========================== Mesh Number in X-Direction: 256 Mesh Number in Y-Direction: 256 Mesh Number in Z-Direction: 75 Left Border Location (X0): -1.50000 Right Border Location (XE): 1.50000 Lower Border Location (Y0): -1.50000 Upper Border Location (YE): 1.50000 Domain Bottom Depth (ZE): 1.00000 Reference Length (XBase): 0.50000 mm Reference Width (YBase): 0.50000 mm Reference Pressure (P0): 0.50000002 GPa Dimensionless Mesh Sizes: in X-direction: Dx= 0.01171875 in Y-direction: Dy= 0.01171875 in Z-direction: Dz= 0.01333333 Calculation completed ===================== Timing Starts at (sec)= 8.0938 Timing stops at (sec) = 135.1719 Total CPU Time Used (sec)= 127.0781 (2011 1 27 82) ******************************************************************************