****************************************************************************** CONTACT SIMULATION PROGRAM ****************************************************************************** $$$ Current Year: 2011 Month: 1 Day: 26 $$$ CASE DESCRIPTION: Flat, Sinusoidal, W=1000 N Flat Contact Parameters ======================= Width of Flat Contact Area: 1.50000 mm Length of Flat Contact Area: 2.00000 mm Average Contact Pressure: 0.08333 GPa Timing Starts (sec)= 1.60937500000000 NT= 1 Pmx= 2.22024 Ha= 197.1071 nm Rq= 0.26802 micron CPU= 4.328 NT= 2 Pmx= 2.22024 Ha= 197.1071 nm Rq= 0.26802 micron CPU= 4.625 NT= 3 Pmx= 2.22024 Ha= 197.1071 nm Rq= 0.26802 micron CPU= 4.984 NT= 4 Pmx= 2.22024 Ha= 197.1071 nm Rq= 0.26802 micron CPU= 5.312 NT= 5 Max. von Mises Stress= 1.844340 at X= 0.000000 Y= 1.000000 Z= 0.000000 NT= 5 Pmx= 2.22024 Ha= 197.1071 nm Rq= 0.26802 micron CPU= 367.406 Flat Contact Parameters ======================= Width of Flat Contact Area: 1.50000 mm Length of Flat Contact Area: 2.00000 mm Average Contact Pressure: 0.08333 GPa Operating Conditions ==================== Applied Load: 1000.000 N Applied Load for Meshing: 1000.000 N Surface 1 Speed: 0.0000000 m/s Surface 2 Speed: 0.0000000 m/s Rolling Speed: 0.0000000 m/s Slide-to-Rolle Ratio: 0.0000000 Spinning Speed: 0.00000 rpm Materials Properties ==================== Youngs Modulus of Body 1: 206.00000 GPa Youngs Modulus of Body 2: 206.00000 GPa Possions Ratio of Body 1: 0.30000 Possions Ratio of Body 2: 0.30000 Effective Youngs Modulus: 226.37363 GPa Density of Body 1: 0.78000 g/cm3 Density of Body 2: 0.78000 g/cm3 Coefficient of Friction: 0.35000 Surface Roughness with Textures =============================== RRA1= 0.20349 Micron RRQ1= 0.25097 Micron RRA2= 0.00000 Micron RRQ2= 0.00000 Micron Composite RMS Roughness (Sig): 0.25097 Micron Roughness Ratio RQ1/RQ2: 999.99902 Solution Domain Parameters ========================== Mesh Number in X-Direction: 256 Mesh Number in Y-Direction: 256 Mesh Number in Z-Direction: 100 Left Border Location (X0): -1.00000 Right Border Location (XE): 1.00000 Lower Border Location (Y0): -1.00000 Upper Border Location (YE): 1.00000 Domain Bottom Depth (ZE): 1.00000 Reference Length (XBase): 1.50000 mm Reference Width (YBase): 2.00000 mm Reference Pressure (P0): 0.08333334 GPa Dimensionless Mesh Sizes: in X-direction: Dx= 0.00781250 in Y-direction: Dy= 0.00781250 in Z-direction: Dz= 0.01000000 Calculation completed ===================== Timing Starts at (sec)= 1.6094 Timing stops at (sec) = 367.5312 Total CPU Time Used (sec)= 365.9219 ******************************************************************************